Home›Window Replacement Services
Whatever is in the opening now, there is a right way to replace it. Here is every window type the installers we match cover, what each one is actually for, and which one your house probably needs.
Not sure which you need? Call (918) 417-1098
Almost every residential window project in the Tulsa metro comes down to three decisions in this order: what the opening allows, what the frame material should be, and what the glass package needs to do in an Oklahoma summer. Style is mostly decided for you by the hole already in the wall, unless you are deliberately changing it. The pages below are organized the way an installer actually thinks about a house.
The default frame material here, and the one most Tulsa-area projects end up using. No painting, no rot, best price per opening. The page covers what separates a 25-year vinyl window from a 10-year one, and the two situations where vinyl is the wrong answer.
The glass decision rather than the frame decision. Insulated glass units, argon, low-E coatings, and what to do about a window that has fogged between the panes, which is the single most common reason a homeowner starts looking.
Three panels projecting from the wall, with a seat board and a roof cap. Structural work as much as window work, and the style where installer experience counts for more than the brand on the glass.
Four to six panels in a gentle curve. More glass and more joints than a bay, a different look, and a meaningfully different price. Compared directly against the bay so you can tell which one you have.
Fixed glass, no moving parts, the largest clear opening and the best energy numbers of any style. Common in 1970s and 1980s Tulsa ranch living rooms, usually flanked by operable units, and subject to one egress rule worth knowing.
A second window over the one you already have, not a replacement for it. The right answer for original wood sashes worth keeping, and the wrong answer for a failed builder-grade unit. The page is honest about which is which.
Hopper and slider units in below-grade walls, plus the code-required egress opening any basement bedroom needs. Less common in Oklahoma than up north, but the older homes that do have them need a cut-and-frame job, not a swap.
Windows and exterior doors as one project. Entry, patio and storm doors alongside the windows, one crew, one permit, one disruption. Usually the better price if the exterior is being opened up anyway.
A short decision path that covers most Tulsa-area situations:
What every one of those costs, by material and by style, is laid out on the window replacement cost page.
Three things get searched alongside window replacement and are a different trade entirely. Saying so up front saves everybody a phone call:
Window Replacement Near Me is a free referral service, not an installer. We connect Tulsa-area homeowners with an independent, insured window installation company and may receive a fee when you are connected. Your estimate, your contract and your warranty all come from the installer, not from us.
No, but it is almost always cheaper per window if you do. The crew setup, the permit and the disposal run cost the same for four openings as for fourteen. If you are phasing the work, do the west and south walls first: in this climate they take the afternoon sun and most of the weather.
Most established full-service installers cover vinyl, double-pane, picture, bay and bow work and can bring in doors. Cut-in egress windows and historic storm window work are the two specialties where not every company is equipped, so tell us what you need and the match accounts for it.
In practice the terms are used interchangeably. What matters is whether they hold current general liability and workers' compensation insurance, whether their own employees or a subcontracted crew does the installation, and who honors the labor warranty. Oklahoma issues no state license for window installers, so those three answers are your real protection.
Four to eight weeks from signed estimate to installation, nearly all of it waiting on custom-sized windows to be manufactured. The installation itself is usually one to three days for a typical house, and every opening is closed the same day it is opened.
That is a completely reasonable use of it, and we would encourage a second bid on any project over a few thousand dollars. Request the estimate and say so on the call. A company that is confident in its pricing has no problem being the second number.
Start with your ZIP code. It takes about a minute, and nothing is sent anywhere until you submit.
Or call (918) 417-1098